Tapping machine safe operating procedures
Source： Shenzhen Huartuo Technology Co., LtdPopularity：1159Published：2017-07-19 14:20:45【SML】
Source: Shenzhen Waldorf Carbon Technology Co., Ltd. Popularity: 5 Published: 2017-06-20 17:07:07 【Small and medium-sized】
Tapping machine safe operating procedures:
1 must clean up the equipment around the debris and keep the environment hygiene, ready to produce the tools and materials needed.
2 If you need to adjust the height of the table, you must turn off the power to operate.
3 first start the machine before the safety check, such as the joystick, the motor turned to the appropriate part of the right, accurate and reliable.
4 machine operation, the operator can not leave the job, leave the power switch must be turned off.
5 clean up the machine around the debris and keep the environment clean and clean.
6 to clean the machine every day before going to work.
7 regularly to the motor, lubricating parts plus lubricating oil.
Precautions:
1) Before use must be familiar with the performance of the device and the correct method of operation, and after technical training! 2) do not allow wearing too loose clothing, with bracelets, necklaces and other jewelry, not allowed to wear slippers to work! 3) Do not wear gloves to operate the machine; must wear gloves to dismantle the workpiece! 4) in the course of the operation to concentrate, to prevent fatigue work; not allowed to play around the machine around the play! 5) When the machine tool spindle rotates, it is forbidden to touch it by hand to prevent injury! 6) pay attention to the maintenance of machine tools, often clean up the table dirt
Consult
13823305398
